ZTE C320 COMMANDLINE

ZXAN#sho gpon remote-onu interface eth gpon-onu_1/4/1:2

Interface:     eth_0/1
Speed status:  auto
Operate status:disable
Admin status:  unlock –> should be unlock
Arc:           0
Arc-interval   0
Expect-type:   0
Speed config:  auto
Eth-loop:      disable
Max-frame:     1632
Pause-time:    0
Wiring :       dce
BridgeOrIP:    either
PPPOE-filter:  disable
Power-control: disable

ZXAN#show mac gpon onu gpon-onu_1/4/1:2
Total mac address : 2

Mac address      Vlan   Type      Port                         Vc
————————————————————————
KEREN.KEREN.KEREN   212    Dynamic   gpon-onu_1/4/1:2          vport 1
BEKEN.BEKEN.BEKEN   121    Dynamic   gpon-onu_1/4/1:2          vport 2
OL01#

CHECKING ONT POWER

OL01#sho pon power attenuation gpon-onu_1/4/1:2
OLT                  ONU              Attenuation
————————————————————————–
up      Rx :-19.153(dbm)      Tx:2.728(dbm)        21.881(dB)

down    Tx :3.769(dbm)        Rx:-18.890(dbm)      22.659(dB)

ZXAN#sho gpon remote-onu equip gpon-onu_1/4/1:2

Vendor ID:           ZTEG
Version:             V5.2
SN:                  ABCDEFGHIJ
Admin status:        unlock
Battery backup:      false
Security Mode:       aes
Product code:        0
TotalPrioQueueNum:   64
TotalTrafficSchNum:  8
TrafficMgmtOption:   priority-rate-controlled
OperState:           enable
EquipID:             F63.2 –> vERSION
OMCC Version:        a0
Security Capability: aes
Model:               F6
Survival time:       N/A
TotalGemPortNum:     256
SysUpTime:           0

In This case, We used ip-host 1

in one ONT we can create 4 IP-HOST management

ZXAN#sho gpon remote-onu ip-host gpon-onu_1/4/1:2

Host ID:            1
HostName:           omci_ipv4_dhcp_1
Identify:
IP:                 0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP-enable:        true
Ping-response:      true
Traceroute-response:true
MAC:                AA.BB.CC:DD:EE
CurIP:              1.2.3.4
CurMask:            255.255.255.0
CurGateway:         1.2.3.4
CurPriDNS:          6.6.6.6
CurSecDNS:          7.7.7.7

ZXAN#sho run int gpon-onu_1/4/1:2
Building configuration…
!
interface gpon-onu_1/4/1:2
descriptionIRONMAN
tcont 1 profile share
gemport 1 name ngenet unicast tcont 1 dir both
gemport 1 traffic-limit downstream 300m
gemport 2 name nontonfelm unicast tcont 1 dir both
gemport 2 traffic-limit downstream 300m
gemport 3 name tilpun unicast tcont 1 dir both
gemport 3 traffic-limit downstream 300m
switchport mode hybrid vport 1
switchport vlan 212  tag vport 1
switchport mode hybrid vport 2
switchport vlan 121  tag vport 2
switchport mode hybrid vport 3
switchport vlan 122  tag vport 3
!
end

OL01#sho onu run con gpon-onu_1/4/1:2
pon-onu-mng gpon-onu_1/4/1:2
flow 2 switch switch_0/1
flow 3 switch switch_0/1
flow mode 1 tag-filter vid-filter untag-filter discard
flow mode 2 tag-filter vid-filter untag-filter discard
flow mode 3 tag-filter vid-filter untag-filter discard
flow 1 priority 0 vid 212
flow 2 priority 0 vid 121
flow 3 priority 0 vid 122
gemport 1 flow 1
gemport 2 flow 2
gemport 3 flow 3
switchport-bind switch_0/1 iphost 1
ip-host 1 dhcp-enable true ping-response true traceroute-response true
vlan-filter-mode iphost 1 tag-filter vid-filter untag-filter discard
vlan-filter iphost 1 priority 0 vid 212
vlan port eth_0/2 mode tag vlan 121
vlan port eth_0/3 mode tag vlan 122
dhcp-ip ethuni eth_0/2 from-internet –> bridging mode
dhcp-ip ethuni eth_0/3 from-internet –> bridging mode
!

ZXAN#config t
Enter configuration commands, one per line.  End with CTRL/Z.
ZXAN(config)#pon-onu
ZXAN(config)#pon-onu-mng gpon-onu_1/4/1:2
ZXAN(gpon-onu-mng)#reboot

ZXAN#config t
Enter configuration commands, one per line.  End with CTRL/Z.
ZXAN(config)#pon-onu
ZXAN(config)#pon-onu-mng gpon-onu_1/4/1:2
ZXAN(gpon-onu-mng)#restore factory

ZXAN#config t
Enter configuration commands, one per line.  End with CTRL/Z.
ZXAN(config)#pon-onu
ZXAN(config)#pon-onu-mng gpon-onu_1/4/1:2
ZXAN(gpon-onu-mng)#interface eth eth_0/3 state unlock

ADT#show system-group
System Description: ZX Version V4.
Started before: 365 days, 5 hours, 25 minutes

ZXAN#show card
Rack   Shelf   Slot   CfgType   RealType   Port   HardVer    SoftVer       Status
——————————————————————————-
1            1        1        GTGO       GTGOG       8       120301    V1.2.5P3    INSERVICE
1            1        3        SMXA       SMXA         3       110702    V1.2.5P3    INSERVICE
1            1        4        SMXA                           3                                             OFFLINE

ZXAN#show temperature
Card Temperature:
——————————————-
Slot Temperature(Celsius scale)
——————————————-
1 34
2 N/A.
3 41
4 N/A.
——————————————

ZXAN#show card slotno 1
Config-Type : GTGO Status : INSERVICE
Real-Type : GTGOG Serial-Number : 277996501746
Port-Number : 8 BootROM-VER : V4.0.7 2015-04-03 15:16:02
PCB-VER : 120301 Software-VER : V1.2.5P3 2015-01-05 03:47:57
Cpld-VER : V1.7
Phy-Mem-Size : 512MB Main-CPU : PowerPC Processor
Cpu-Usage : 12% Cpu-Alarm-Threshold : 100%
Mem-Usage : 21% Mem-Alarm-Threshold : 100%
Last restart reason: Watchdog Unfed
Uptime : 0 Day , 0 Hours , 9 Minutes , 15 Second

ZXAN#show card slotno 3
Config-Type : SMXA Status : INSERVICE
Real-Type : SMXA Serial-Number : 275204900419
Port-Number : 3 BootROM-VER : V4.0.12 2016-12-06 17:06:07
PCB-VER : 110702 Software-VER : V1.2.5P3 2015-01-05 03:50:18
Cpld-VER : V1.7
Phy-Mem-Size : 1024MB Main-CPU : PowerPC Processor
Cpu-Usage : 2% Cpu-Alarm-Threshold : 100%
Mem-Usage : 30% Mem-Alarm-Threshold : 100%
Last restart reason: Watchdog Unfed
Uptime : 0 Day , 0 Hours , 10 Minutes , 59 Second
Subcard 1 :
Config-Type : UCDC/1 Real-Type : UCDC/1
Status : INSERVICE Port-Nummber : 3

ZXAN#show processor
Rack Shelf Slot CPU(5s) CPU(1m) CPU(5m) PhyMem(MB) Memory
——————————————————————————-
1 1 1 9% 14% 18% 512 21%
1 1 3 1% 2% 2% 1024 30%

ZXAN#config t
Enter configuration commands, one per line.  End with CTRL/Z.
ZXAN(config)#pon-onu
ZXAN(config)#pon-onu-mng gpon-onu_1/4/1:2
ZXAN(gpon-onu-mng)#interface eth eth_0/3 state lock

ZXAN#config t
Enter configuration commands, one per line.  End with CTRL/Z.
ZXAN(config)#pon-onu
ZXAN(config)#pon-onu-mng gpon-onu_1/4/1:2
ZXAN(gpon-onu-mng)#ip-host 1 dhcp-enable false ping-response false traceroute-response false

ZXAN(gpon-onu-mng)#ip-host 1 dhcp-enable true ping-response true traceroute-response true

Make Sure , There is no CRC Counting at your Uplink Interface :p

ZXAN#show int optical-module-info xgei_1/21/1
Optical module information:xgei_1/21/1
Basic-info:
Vendor-Name    : SOU          Vendor-Pn      : SPP1
Vendor-Sn      : D9               Version-Lev    : 10
Production-Date: 13                   Module-Type    : 10GBASE-LR
Wavelength     : 1310      (nm)           Connector      : LC
Diagnostic-info:
RxPower        : -10.1(dbm)          TxPower      : -1.7(dbm)
Bias-Current   : 25.724    (mA)           Laser-Rate   : 103(100Mb/s)
Temperature    : 24.184    (c)            Supply-Vol   : 3.324(v)
Alarm-thresh: –> Threshold
RxPower-Upper    : 3  (dbm)               RxPower-Lower    : -34(dbm)
TxPower-Upper    : 9  (dbm)               TxPower-Lower    : -14(dbm)
Bias-Upper       : 131(mA)                Bias-Lower       : 0  (mA)
Voltage-Upper    : 7  (v)                 Voltage-Lower    : 0  (v)
Temperature-Upper: 90 (c)                 Temperature-Lower: -45(c)

ZXAN#reset-card slotno 3

Use This for First Level Handling when you get Anomaly Process.

sometimes it can help you, but sometime isn’t.

ZXAN#swap

ZXAN#sho vlan sum
All created vlan num: 3
Details are following:
1111, 222 , 333
ZXAN#

ZXAN#sho vlan 1111
vlanid          :1111
name            :VLAN001111
description     :N/A
multicast-packet:flood-unknown
tpid:0x8100
port(untagged):
port(tagged):
gpon-onu_1/2/8:12:1
xgei_1/3/2
sg1